RVC 508F - Suburban 22 Ltr Water Heater - Gas/240V

$1200.24 Inc GST
Product is out of stock :

Quality you want ... now and down the road.

One of the  best water heaters on the road today. Suburban uses a procelain-lined, steel water heater tank with an anode rod to "absorb" the electrolytical action - just like the water heater in your home.


  • Faster Recovery - Fast recovery means more hot water.  22 Litre Suburban Water Heaters feature 12,000 BTUH input and a recovery rate of 38 Litres per hour, that's the fastest in the industry.
  • More convenience - All Suburban Water Heaters are designed for easy installation, operation and maintenance. 
  • The limit switch and reset button are conveniently located in a housing behind the removable outer door.  The electric heat element and combination drain plug/anode rod are also located there.
  • Longer Life - Heated water attacks all metals, but not porcelain.  That's why Suburban uses a porcelain lined, steel water heater tank with an anode rod to "absorb" the electrolytical action - just like your water heater at home.
  • Meets new NZ gas regulations and *NZ/Australian WaterMark certification scheme


Capacity 22 litre
Burner rating 12,000 btu (approx) 4kW
Fuel LPG/240V
Recovery (litres per hour) 38 ltr
Dimensions (excluding door) 320 x 320x 500mm
Weight when empty 15
Weight when full 37

* What is the WaterMark Certification Scheme

Material and product failures in plumbing systems can cause contamination
of the water system and be a public health concern. The WaterMark Certification Scheme is a mandatory certification scheme for plumbing and drainage products to ensure that plumbing and drainage materials and products are fit for purpose and appropriately authorised for use in plumbing installations.

The Plumbing Code of Australia requires certain plumbing and drainage materials and products to be certified and authorised for use in a plumbing or drainage installation. These materials and products are to be certified through the WaterMark Certification Scheme and listed on the WaterMark Product Database.

In order to achieve Watermark Certification, the subject material or product must:

  • be tested by a recognised testing laboratory;
  • comply with an approved specification (either a relevant existing standard or an approved WaterMark Technical Specification);
  • be manufactured in accordance with an approved Quality Assurance Program; and
  • carry a warranty.

Materials and products complying fully with the applicable requirements of the WaterMark Certification Scheme are then eligible to be certified by a WaterMark Conformity Assessment Body (WMCAB) and listed on the WaterMark Product Database. 
Certified materials and products are identifiable by the WaterMark trademark, which must be displayed on the material or product upon the granting of a WaterMark Certificate of Conformity.


You may also need ....

$0.00 NZD

$0.00 NZD

Whale Surge Damper
$83.70 NZD

Whale Silent Watermaster Pump 12v 8ltr - 30psi
$273.00 NZD