RVD 121 - Propex Heatsource Gas Air Heater 2 kw HS2000

$1644.50 Inc GST
Product is out of stock :

Keep Warm This Winter With A Propex Thermostatically Controlled Air Blown Heater. Ideal for  Motor homes, Caravans, Horse Trucks, etc.


  • Thermostatically controlled to maintain the desired room temperature. The thermostat is an easy to fit surface mount design and integrates with the new electronics fitted to the HS2000 heater.
  • The Heatsource unit is totally room sealed and exhausts combustion externally through the neat 22mm i.d. stainless steels flue pipe. To add to the efficiency, cabin air is normally re-circulated in preference to using cold air from outside.
  • Two stage stainless steel heat-exchanger for a clean and highly efficient way to heat your vehicle. With forced air combustion the air for combustion is taken from outside and passed into the combustion chamber having been mixed with gas during three aeration stages, it is ignited automatically and heats up the large surface area of the heat-exchanger.

  • Very efficient on electrical current consumption, the high quality motor/fan combination and innovative current reducing electronics, draws less than 2 amps during normal operation.

  • Quiet Operation: Propex heaters are designed to be quiet in operation without compromising air throughput and heat output. There will always be some air noise from a system that produces a healthy throughput of air, however, by using high quality balanced fans and smooth enclosed motors with ball race bearings, noise is kept to a minimum. Noise is also unaffected by high voltage, a common occurrence with battery charges, solar panels etc permanently wired. The micro-processor electronics regulates the motor voltage so that the fan speed does not alter from 10 to 15 volts.

  • Compact easy to install: Supplied with installation fitting kit for one outlet. The HS2000 is  supplied with a complete fitting kit.  In vehicles and caravans the unit is usually mounted in a bed-box or cupboard, flued downwards through the floor and out to the side of the vehicle using flexible stainless ducting.

Complete installation kit

Heatsource HS2000 Kit

Technical Specifications

  Average Consumption 142 grams/hour
  Heat Input: 2.1kW
  Heat Output: 1.9kW
  Warranty 1 year
  Dimensions  (mm)
  320(L) x 172(W) x 100(H)
  Voltage: 12V
  Current Consumption: 1.4A continuous running
  Air Throughput: 60 C.F.M.
  Fuel: LPG