RVJ 308 - 10 Amp Steca Regulator - 12/24 Volt
Our price $124.67
One of Steca's bestsellers are the photovoltaic controllers of the Solsum C series which are used in small solar home systems with a 5 to 10 Amp solar charging and load current capacity (up to 240Wp). The electronic board uses automized through hole technology for easy local maintenance.
Features
- Voltage regulation
- PWM shunt battery charging
- Boost and Float charging.
- Automatic load reconnection.
- Automatic selection of voltage (12V/24V)
- Temperature compensation.
- Positive grounding (or) Negative grounding on one terminal.
Electronic Protections
- High voltage disconnect (HVD)
- Low voltage disconnect (LVD)
- Reverse polarity of solar modules
- Reverse polarity of load and battery
- Short circuit of solar modules
- Short circuit of load
- Over temperature
- Over voltage
- Lighning protection by varistor
- Open circuit battery
- Reverse current at night.
Specifications
| System voltage | 12V (24V) |
| Max. module input short circuit current | 10A |
| Max. load output current. | 10A |
| Max. self consumption | 4 mA |
| End of charge voltage (float) | 13.7 V (27.4V) |
| Boost charge voltage; 2h | 14.4 V (28.8V) |
| Reconnection setpoint (LVR) | 12.6V (25.2 V) |
| Deep discharge protection (LVD) | 11.1V (22.2 V) |
| Ambient temperature allowed | -25oC to +50oC |
| Terminal size (fine/single wire) | 2.5mm2 / 4mm2 |
| Enclosure protection class | IP22 |
| Weight | 165g |
| Dimensions l x w x h | 130 x 88 x 39mm |