RVK 140 - 10 Amp 12 Volt Battery Charger

Our price $232.96


The RVK 140 3-stage battery charger is microprocessor controlled for fast and accurate charging of all deep-cycle batteries.  A wide AC input voltage range enables proper delivery of a full three-stage charge, even when charging from less than perfect quality shore power or generator power.

Features:

  • Universal AC input with active PFC.
  • High - performance 3-step charging effect.
  • Advanced 8 bit microprocessor control circuit.
  • Reverse battery protected by  fuse.
  • Ignition protection.
  • Output short circuit protection.
  • Over power protection.
  • Easy to read LED's for system status.
  • Compact size, light weight.

Specifications

Output  
DC Voltage Range 14.4V
Rated Current 10A
Current Range 0 - 10A
Rated Power (max) 144W
   
Input  
Battery Charger Mode 3 Stage Battery Chargers
Voltage Range 88 - 264VAC
Frequency Range 47Hz - 63Hz
Efficiency (Typ.) at 230Vac 80%
AC Current (Max) 1.9A/90VAC
Inrush Current (Typ) Cold Start 30A/230VAC
Leakage Current <.75mA/240VAC
   
Protection  
Overload

102-110% rated output power.
Protection type: Constant current limiting, Hiccup mode, recovers automatically after fault condition is removed.
Over Temperature 85 degrees celsius (plus or minus 5 degrees)
Protection type: Shut down output voltage, recovers automatically after temperature goes down.
   
Environment  
Working Temp. -20 degrees to 50 degrees celsius
Working Humidity 20 - 90% RH non-condensing
   
Other  
Dimensions (L x W x H) 210x 85x 50mm